Do not plug in an appliance where the load exceeds 10Amp. Always ensure the plug of any appliance is fully inserted into the time outlet. If cleaning of the timer is required, remove from mains power and wipe timer with a dry cloth.

Initial Operation:

1. Plug the timer into a regular 220-240 Volt 50Hz housrhold power point and turn the power on.

2. Leave for approximately 12 hours to charge the memory back up batteries.

Setting Current Time:

1. Press the CLOCK button and hold, simultaneously press the week button until the actual day is displayed. Continue by pressing HOUR or MINUTE button until the current hour or minute is displayed. When setting, the buttons week, hour or minute can be held down for repid forward counting.

2. Release both buttons. The week and time will be set.

3. To reset incorrect time, repeat previous steps.

Specification:

Voltage: 125V AC 60Hz

Max load: 16A

Number of programs: 16(20) Times

Operating Temperature: 0-40°C

Min in setting Time: 1 Minute

Accuracy: ±1 Min/Mon

Shell material: PC

Battery: Ni-Mh 1.2V 80(40)m AH>100hrs

Meas: 62*42*110mm

Box Size: 35*32.5*47cm

Packing:

1 X Timing switch.