Description:

Strong light source and strong penetrating power.

This product is suitable for SC; FC; ST interface.

Hand-held and easy to carry.

Detection distance up to 50KM.

Suitable for a wide range of models.

Aluminum body.

Specification:

Source wavelength:650+/-10nm

Working temperature: -20'C to 60'C (no condensation).

Suitable for fiber: SCFCST

Power working time: ≧20hours

Connector: 2.5mm universal adapter.

Storage temperature:-40’C to 85’C

Operation step:

1) Check the fiber fault detection pen.Check that the parts are complete. Check if the battery level is sufficient.

2) Insert the detection fiber; open the fiber protection cap and insert the fiber to be tested.

3) Observe and test; open the laser after insertion and watch the actual situation of the test product.

4) Daily maintenance: Wear a protective cap when not in use. The battery compartment is kept clean and replaced frequently.